MICHAEL's latest activity
-
MICHAEL replied to the thread GRS gravermach foot pedal problem???.Just ran into this and watched the GRS video on adjusting the bleed screw. Should be 7-8 mm not 12. Mine was loose as I had never... -
It's just a light swipe across ceramic holding the graver approximately vertical. I don't think about it much...I just do it. There may...
-
Jere I do mine a bit different...i think.... When i am done sharpening myngraver, i just hold it upon my ceramic stone vertically and...
-
Mitch has it spot on! I looked at one of my dubbed tools with the idea to take a photo but the area is so small I gave up on the idea.
-
For hard metal I double dub...I put a very small facet on the tip of the face at perhaps 80 or so degrees (compared to the heel)...
-
MICHAEL reacted to Keeling_Machines's post in the thread Critique Request Finished Spyderco Bulino style shading with
Like.
Not great photos but wanted to share the finished product. I’m feeling like I’m starting to get ahold of “Bulino” shading. While I think... -
MICHAEL reacted to Artist007's post in the thread Smith & Wesson 36 Chief - Engraving My Second Pistol with Like.
I've finished engraving the cylinder of the model 36 I am working on. It's going to be somewhat inspired by the antique revolvers...
-
The simple answer to all of this is that there is no "easy" way to engrave a barrel. If you are using hammer and chisel it is easier to...
-
MICHAEL reacted to EngraverHand's post in the thread What is a good printer setup for doing transfers on to metal? with Like.
I can only confirm what works for me.. as for laser printer I use an old HP LaserJet P2035. It can print in maximum 600 dpi so it has...
-
MICHAEL reacted to alwayslearning2012's post in the thread Just wanna give a HUGE shoutout to the folks at Glendo LLC with Like.
A few weeks ago, I mentioned an issue I was having with my 901AT. Later the issue became a bit different as the holder was becoming...
-
I just saw this and did a quick check under my Leica A60 with a 0.63x objective lens. I was able to lower my telescopic GRS turntable...
Sponsors
