Liner Gravers

Michael Greco

Member
Joined
May 30, 2015
Messages
9
Location
Shreveport, LA
Hello.
First time posting.
Not yet 3 years cutting metal so I am quite the neophyte.
How and where does one use a Liner Graver?

Thank you all in advance.

Dr. Michael A. Greco (Mike)
 

Stefan

Elite Cafe Member
Joined
Oct 14, 2018
Messages
135
Hatching. Creating shadows.
See old engraving work. Cigarette cases. Cutlery. There are often used linear engravers. Learn from the works of old masters.
 

mdengraver

~ Elite 1000 Member ~
Joined
Apr 10, 2007
Messages
3,595
Location
Rockville, MD
Liners are good but high quality engraving is usually done with a regular graver one line at a time. Using liners is generally considered an inferior kind of engraving. Engraving Individual lines from regular gravers allows the engraver greater control of line width and depth, and spacing between lines. Lines executed with a regular graver are more precise and time consuming, and can reveal a greater richness, and variety in line quality in an experienced and capable engravers hands. Thick and thin lines in an experienced engravers hands as the graver is rolled and and straightened along the way can achieve lighting effects, shading, perception of depth and perspective. I'd like to hear from the experienced engravers their opinion of using liners in their work and if they use them judiciously. The lines from liners don't wear as well but for certain types of engraving they are necessary where line depth should be minimal such as plated items where the base metal changes under the plated surface. Also liners are good where the metal is thin and depth of cut should be minimal. The bent liners can be used inside curved objects such as bowls to create a lift that allows the graver to move through the curved surface. In some instances liners can be used to create a decorative effect, texture, and as a filler in lettering. Interesting wriggle effects can achieved with liners by walking and rocking the liner at high or low angles to the surface of the engraved object, creating tight or loose textured line patterning. Wriggling is also generally considered a cheaper form of engraving but when done well is quite masterful. The liner tool may be used on musical instruments where depth of cut on thin instrument metal isn't advantageous. Florentine liners are flat-bottomed tools with multiple lines incised into them, used to do fill work on larger areas. For a Florentine finish, the most popular liner is #18/10 graver used for making parallel lines in backgrounds or to achieve a florentine finish. Specified by widths of cutting edges and number of lines graver will cut in one stroke. Also available in bent styles. https://engraverscafe.com/threads/liner-graver-advice.21093/
Liners are used in western brightcut engraving for very specific cuts and must be learned as part of a very methodical process to achieve the desired result. Viewing tutorials from masters such as Diane Scalese will reveal its unique secrets and beauty.
 
Last edited:

Mike Dubber

Elite Cafe Member
Joined
Nov 10, 2006
Messages
424
Location
Evansville, IN
I agree with Mr. Roberts, NgraveR Co. makes great Liner Gravers.

I would not agree that the Liner Graver is no longer acceptable in modern engraving, or that they are used for inferior work. Much of my work is done on Colt Firearms following the traditional and accepted style of the Old Masters - and they definitely used Liners to embellish their scrolls. I use them for all the applications listed in the commentary above. I used them to detail the scrolls on the Ancranthrosaurus flooplate shown in my recent thread - and I used one today to add matching lettering to a very old trophy sent to me for restoration.

Recently I taught a class at the Marc Adams School and a student brought in a selection of ancient gravers found at a yard sale. He had paid $5 for the lot (and the cigar box they came in). As I picked through them one caught my eye. It was a liner, and it was unique in its design and construction; I had never seen one like this before. This liner had 9 teeth, it is 2mm wide, and it has a triangular body that is bent through its entire length. My fascination must have shown, because the student said, "Go ahead, please, pick one out for yourself." I thanked him and walked back to my desk with this special little Liner.

I sharpened it in my traditional manner, a 45 degree slightly rounded face with the teeth blunted at 0 degrees at the end. I found this tool to be very hard, and under close examination, appears to have been hand-worked into its triangular configuration. It is English made, and I love the way it cuts fine delicate lines. Although I've I have used it over the past few months, I did change out the wooden handle and now use it with air power. It's one my favorite gravers !
Liner_01.jpg
 

Attachments

  • Liner_02.jpg
    Liner_02.jpg
    201.5 KB · Views: 123
  • Liner_03.jpg
    Liner_03.jpg
    97.3 KB · Views: 124

Big-Un

~ Elite 1000 Member ~
Joined
Nov 10, 2006
Messages
1,370
Location
Eden, NC
That looks like the old time (maybe not so old) graver for inside bowl work.
 

mdengraver

~ Elite 1000 Member ~
Joined
Apr 10, 2007
Messages
3,595
Location
Rockville, MD
Now Mike when you wriggle you can be like Johnny Cash and walk the line! Nice story! Thanks for sharing!
 
Last edited:

alladin

Member
Joined
Dec 26, 2014
Messages
28
Hi MikieDu,
I had bought these needle files when i started my apprenticeship some 35 years ago.
They are of excellent quality. I almost cried when i snapped 20181122_114956.jpg 20181122_112212.jpg one, they are hard and still almost like new.
I hope the pictures come out
 

JJ Roberts

:::Pledge Member:::
::::Pledge Member::::
Joined
Nov 10, 2006
Messages
3,457
Location
Manassas, VA
I have many old gravers from all over,Studs,Vautier,John Sellers & Son's,Brand,Renard,Ezra F. Bowman & Co. and Johnson.I bought three box's of gravers from a clock repair shop in old town Manassas Virginia years ago. J.J.
 

monk

Moderator
Staff member
::::Pledge Member::::
Joined
Feb 11, 2007
Messages
10,857
Location
washington, pa
i agree. i used to buy old graver lots on the bay. many were just barely usable, but of the good ones, it allowed me to have many different geometries/shapes/sizes that i otherwise may never have acquired. except for n-graver liners, all mine came from the lots on the bay.
 

DARNEW

Member
Joined
Feb 8, 2007
Messages
82
Personally I never use a line graver on single line engraving such as guns or knifes. The line graver`s will not give you the desired shading that is needed to make it stand out and give it depth. I learned to use the line graver`s on what is called the western bright cut style. This is a style that is used on western silver items such as belt buckles and western jewelry, although I am seeing mare of the single line on western silver also. The line graver`s are used for both shading the leafs, wriggling an edge or boarder and for background.
 

Sponsors

Top