Help, please: Coin carving question

Ryan138

Elite Cafe Member
Joined
Jan 20, 2020
Messages
123
Location
Dayton, OH
Fairly new but here is my latest carving. My question is what do you guys use to clean up the background (work marks) such as those around the front of my face. Looking to find a way to blend the coin better. I've been told to try out ceramic finishing stones but just wanted to hear from the group.
IMG_20200429_160659_021.jpg
 

monk

Moderator
Staff member
::::Pledge Member::::
Joined
Feb 11, 2007
Messages
10,857
Location
washington, pa
you can use burnishers, very fine abrasive sticks, tooth picks, lotsa things. do a bit of experimenting. decide what works best for you and go with that. chris decamillis sell such abrasives. check out his site.
 

bildio

Elite Cafe Member
Joined
Dec 11, 2010
Messages
292
Location
MD
you can use burnishers, very fine abrasive sticks, tooth picks, lotsa things. do a bit of experimenting. decide what works best for you and go with that. chris decamillis sell such abrasives. check out his site.

See finishing stones and holders at Finishing Stones, bottom of web page.
 

gtsport

Elite Cafe Member
Joined
Feb 16, 2007
Messages
305
Location
Racine, wisconsin
Start with a radiused heel flat graver. I push from the rim towards the bust gently to shave just a little at a time and use overlapping pushes to keep it smooth until all the lines are gone and you have small waves instead of gouges. then move on to stones.
 

Ryan138

Elite Cafe Member
Joined
Jan 20, 2020
Messages
123
Location
Dayton, OH
Thanks for all your suggestions guys. Today is my birthday (24) so as soon as the day settles I will look into everything.
 

Eric Olson

Elite Cafe Member
Joined
Nov 16, 2010
Messages
221
Location
Louisville, CO
You could also use a liner to make a florentine-type of texture for background areas. Also you could use a hammer and small punch to planish the background areas smoother but with a little texture. Getting the background back to smooth is not very easy.
 

Dave London

~ Elite 1000 Member ~
Joined
Nov 12, 2006
Messages
1,764
Location
Colorado
There is a tutorial on the Steve Lindsay site, done by Steve Ellsworth. Coin carving for fun and profit, I think is the thread title
 

monk

Moderator
Staff member
::::Pledge Member::::
Joined
Feb 11, 2007
Messages
10,857
Location
washington, pa
i also use tiny scrapers that i use to pull, rather than push. fewer disasters that way. just a few of my hobo tools. most are repurposed dental instruments. cut to size and sharpened to suit the way i work. be friend a dentist !
 

Attachments

  • HOBO TOOLS.jpg
    HOBO TOOLS.jpg
    87.1 KB · Views: 48
Last edited:

JOEYS CARVED ART

Elite Cafe Member
Joined
Nov 7, 2013
Messages
224
Location
West Virginia
I stipple a lot of my backgrounds, it blends lines and uneven surfaces well, it also is good for holding color if you decide to blacken or color the background
 

SamW

:::Pledge Member:::
::::Pledge Member::::
Joined
Jan 31, 2007
Messages
2,426
Location
Castle Valley, UT in the Red Rock country
To clarify my comment, I use knife gravers, mostly #1 for the scrapping as you get a good straight edge to work with, the length of the face edge can be easily changed by changing the face angle or grinding off metal on the graver back.
 

Ryan138

Elite Cafe Member
Joined
Jan 20, 2020
Messages
123
Location
Dayton, OH
Ive been using the flat to take away scratches and using some ceramic stones to clean it up. This is my progress since first starting this post.
received_877454972737097.jpeg
 
Top