Search results

  1. T

    Help, please: Need Help Troubleshooting, Gravermax Handpiece Vibrating Without Engaging Pedal

    I was able to figure out where the leak was coming from. The pedal was allowing too much air to escape because the surfaces of the internal parts are no longer well mated. Likely will need either a new pedal or to sent the current one in for repair.
  2. T

    Help, please: Need Help Troubleshooting, Gravermax Handpiece Vibrating Without Engaging Pedal

    Appreciate the response, out of curiosity how would a hole cause this?
  3. T

    Help, please: Need Help Troubleshooting, Gravermax Handpiece Vibrating Without Engaging Pedal

    I took a couple years off from using my GraverMax and recently hooked it up and the handpiece is vibrating like crazy when I turn on my GraverMax. My inlet pressure to the GraverMax is about 50 PSI and the handpiece pressure is around 15-20 PSI. I have tuned it by setting the handpiece to 0 and...
  4. T

    Critique Request Is My 120 Sharpened Correctly?

    Attached are a few photos of my 120 degree under the view of my scope at 7X magnification. Would love to hear input on heel length or general shape. I sharpen the main face to 50 degrees and 5 degree taper on the sides. The heel doesn't have a measured angle, just what i thought would be...
  5. T

    Question: Graver Tip and Heel

    Good morning, Good afternoon and Good evening everyone, I am fairly new to the world of engraving and have been spending a lot of time lately working on my scroll design and basic line and curved cuts to get a feel for my GraverMax. I recently purchased a power hone along with a standard...

Latest posts

Sponsors

Top