Grs handpiece compatible with other mfrs?

T.G.III

:::Pledge Member:::
::::Pledge Member::::
Joined
Jul 25, 2009
Messages
54
Location
Oregon
#2
nothing to offer other than to say that back in the day, 8 lug Ford wheels would fit Chevy but Chevy wouldn't fit Ford...............
 

Brian Hochstrat

:::Pledge Member:::
::::Pledge Member::::
Joined
Nov 9, 2006
Messages
654
Location
Midvale, Id
#4
I too have asked the question, if GRS handpieces would run on the Enset, as good as I think the Enset itself is, I personally dislike the eroganomics of that large handpiece. Maybe somebody who as access to both machines could do a test, as I am sure others have considered this.
 
Last edited:

gtsport

Elite Cafe Member
Joined
Feb 16, 2007
Messages
267
Location
Racine, wisconsin
#5
A few years back I built my own air pulse machine (NOT one of the cannibalized air compressor machines you see on you tube) that used a digital timer and solenoid valve so that I could go from a single air pulse up to around 1,000 pulses per minute with my GRS handpiece. It worked fine. I'm pretty sure my machine was similar to the Enset in operation.
 

Sponsors

Top