Intro - What can I do with the Gravermax

Joined
Jul 24, 2020
Messages
1
Thread starter #1
Hi,
Robert (Yooperwoody) here. Jeweler (mostly stone setter and repair) for quite a few years and always wanted to use the Gravermax. Finally had some cash to burn. I bought one and a block and the normal basic selection of stuff needed. Honestly, I know nothing, so hit me with the suggestions and directions. Lead me to greatness with this dream tool.

Thanks in advance.
 

monk

Moderator
Staff member
::::Pledge Member::::
Joined
Feb 11, 2007
Messages
9,729
Location
washington, pa
#2
welcome. put the machine away for 2 or 3 weeks, and begin reading and looking at videos. there's a tip section, as well as a spot on the forum top for beginners to read. good luck in yer pursuit
 
Joined
Dec 19, 2015
Messages
92
Location
Holland
#5
For jewelry work. You can hammer bezels when stonesetting. You can use the gravermax instead of handpushing your gravers. So much easier and better for your body. You can use it for stonesetting by brightcutting, cutting pave and even putting a beading tool in the grs collet.

You need to get a feel for the machine. Regardless if your using a pedal or the airtact tingy.
 

gcleaker

:::Pledge Member:::
::::Pledge Member::::
Joined
Jan 24, 2015
Messages
380
Location
jefferson city Missouri
#6
The sky is the limit, what ever you can dream and draw you can cut and shape. I started with ytube how to engrave when I became serious, read everything I could. I really have enjoyed ray clovers basic scroll manual. He touches on a great many learning points with a simple and effective approach. Good luck from one stone cutter to another, contact all of use any time you want,
 
Top