Marius Mellebye - EngraverHand Designs and Artwork

[EngraverHand]

Hi all Some of my engraving and designs, some for study, some for practice and some ideas for actual engraving projects..

So this first one is an idea and a study for an actual knife I have that will be engraved.. not sure if this is the final, but started sketching.



This one started as a design for a knife.. but I was not too happy with it, but I didnt want it to go to waste, so I finished more or less in a different way..



And this one is a design for a knife I´m working on at the moment..

 

[wild willie]

your work is nothing short of amazing and im sure your customer will have the same reaction no matter what u do. enjoy.

 

[EngraverHand]

your work is nothing short of amazing and im sure your customer will have the same reaction no matter what u do. enjoy.

Many thanks!

 

[EngraverHand]

This is a knife I engraved a couple of years back.. it was my very first real gold inlay with 24k gold.. The knife itself was nothing special, but a good experience and a gift for my father..

It has as you can see different design on each side.. as it was beside a gift for my father, a good practice piece for me.. The Stainless steel was really crap and thin.. but happy with the end result at the time

 

[EngraverHand]

My very first watch caseback I did some years ago.. I think this must have been in 2019..

 

[Dani Girl]

My very first watch caseback I did some years ago.. I think this must have been in 2019..

View attachment 51224

beautiful engraving sir

 

[EngraverHand]

beautiful engraving sir

many thanks!

Here is the dial that I engraved for the same watch. The dial was 0.8 mm thin, so it was a bit scary.. and even more scary, it was before I had a proper vise, so it was wiggling like crazy.. I really cant understand I could do it like that.. but worked well in the end.

I´ll post a video of the process at the bottom if anyone interested. I think it´s quite long and probably a little boring, but..

 

[EskatonArt]

Awesome work man

 

[EngraverHand]

I´m working on my first titanium pendant. I believe it´s grade 2 and titanium is totally new to me. I was always a little afraid to try and turned down many jobs with titanium because I didn´t have any experience with it.. Anyway, this grade 2 cuts really well and is quite enjoyable to work with. At least I´m having fun with it.

I´m using the M48 gravers and no tip breaks as I was "afraid" of.. so far

 

[Adder]

Very very nice Marius. Do you use a universal 116 deg faceangle when cutting/shading?

Jørn-Ove

 

[wild willie]

absolutely beautiful work and u are having fun to . thanks for showing

 

[EngraverHand]

Very very nice Marius. Do you use a universal 116 deg faceangle when cutting/shading?

Jørn-Ove

Yes I use the 116 for almost everything, including this. This one has a little more steep face.. I dont know exactly the degrees, but I guess around 50+ for a little more strong tip. I use the bead setter, but the same 116 Universal template

 

[MoldyJim]

Damp it! now I drooled all over my keyboard.
Beautiful!

 

[EngraverHand]

Scary.. I usually engrave stainless steel, then I did a titanium pendant and then jumping back to this gold ring.. Starting with the monogram on the face but still have to remove the background and add a little shading.. Phew, I totally forget to breathe.. It scratches just looking at it.. Happy so far, but it´s quite small, for me like a pinky finger ring.

Photo not edited except a little blur on the edges.. but had to use a kind of flat light..

 

[EngraverHand]

Yesterday I finally got the time to put my signature on the titanium pendant I recently engraved.. so I can say it’s officially done and off it goes to the USA again.

I also had a little fun making a new soundtrack for this video, so if anyone wants to see the process of the engraving and listen to the music, there is a YouTube video

Hope you like it!

 

[papart1]

this is NICE

 

[EngraverHand]

Thanks all for looking and comments! I´m happy for all constructive comments.

Just finished this ring too.. casted gold was quite a challenge, but fun and turned out great I think, even though I was struggling a little with shading, but no one will ever see at real size.