alwayslearning2012's latest activity
-
alwayslearning2012 replied to the thread Critique Request An attempt at redemption.Thanks so much for that. I never thought of that. Ya know, I really need to get that light bulb switch fixed. -
alwayslearning2012 reacted to T.G.III's post in the thread Critique Request An attempt at redemption with
Like.
On the acetone transfer, it takes a bit of extra time but using a scribe and tracing over the design allows for the removal of the ink... -
alwayslearning2012 posted the thread Critique Request An attempt at redemption in Hand Engraving Forum.This plate was an extra practice plate from October. It was an acetone transfer. The bottom I had to basically guess what it was telling...
-
-
alwayslearning2012 replied to the thread Help, please: SOLVED: Problems setting up my new GraverMax."The foam is a neat idea for noise reduction. But does the compressor not get too hot inside? I bought an oil compressor so mine isn’t...
-
alwayslearning2012 replied to the thread Question: What is the purpose of polishing a graver?.Thank you for your enlightenment, BB. It is appreciated. I am listening. Which is sometimes better than just hearing. That stainless...
-
-
alwayslearning2012 replied to the thread Help, please: SOLVED: Problems setting up my new GraverMax.Please keep in mind that the machine shop there works 4-10s so he's probably away for the weekend. But Be patient, I have no doubt they...
-
-
I'm looking for some fellow engravers from the bluegrass. I'm planning my entry for this years state fair. Every year I go, I like to go...
-
-
alwayslearning2012 reacted to ByrnBucks's post in the thread Question: What is the purpose of polishing a graver? with Like.
Good evening Always learning, Been watching both your threads and wanted to throw a couple of things out at once. Firstly your...
-
alwayslearning2012 replied to the thread Help, please: SOLVED: Problems setting up my new GraverMax.just a thought....But I believe a set of instructions probably came with your gravermax. I'd strongly suggest that they be read and...
-
I found that new students will have death grip on the handpiece I tell them just guide the handpiece though the cut for better control I...
-
alwayslearning2012 replied to the thread I'm just a beginner.....Thanks all for replying. Firstly, I know I can make better cuts the those. I just thought I'd place some really embarrassing work out...
-
For stainless...your control needs to be as perfect as you can get it. Your gravers will not be able to stand even the slightest wobble...
-
alwayslearning2012 replied to the thread Question: What is the purpose of polishing a graver?.it seems that even when I'm not cutting I will learn something. Thank you for your insight.
-
alwayslearning2012 reacted to papart1's post in the thread Question: What is the purpose of polishing a graver? with Like.
Thanks Mr. Doug for your insight and experience
-
alwayslearning2012 reacted to T.G.III's post in the thread Question: What is the purpose of polishing a graver? with Like.
As Doug mentioned above, the jewelry industry really likes their work to sparkle, lettering, western bright cut, and Flare Cutting are...
Sponsors
