I've used the Meiji EMZ-5s and they're nice. The Leica A6 is definitely better, but I really don't think it's enough better to justify the price difference. I currently own an Omano that's older than my HS freshman daughter, and I, like fitzo, bought it intending to upgrade. It's the same as the...
It does contain copper (usually), but so do most gold alloys. In this case it's not the copper that makes it green, it's silver. A gold/copper mix (which usually also contains some silver) gives us rose gold.
So in theory, green gold should be harder to inlay than pure gold or fine silver, but...
I would agree with both of the above, but I think the power toys do more than just save time. Hand push and powered engraving are, to me, very different things. The principles and essentials are the same, but having to exert force (hand push) while also maintaining control is a much more complex...
FWIW, I'm pretty sure that was wrought iron rather than cast. It's kinda streaky or fibrous in nature with a lot of silica impurities. Which makes it look AWESOME when used as knife guards or outer layers of san mai blades and heavily etched. It forges like butter at higher heats, but can split...
Hard to beat the advice above.
I'd also consider whether or not I wanted to sell as a whole lot or as individual pieces. You might get lucky and find someone that wants it all, but most likely folks will just want parts they don't already have (like, for example, I'm interested in your low...
I drew up this design for a project for a friend from Varna back in September, but I ran out of time to get it cut before a meeting in London. I cut it later on a practice plate and would make some modifications, but overall I thought it was pretty cool. IT was designed to be cut on a gold...
I'm quite happy with the film from Tira Mitchell. There are different films for steel vs carbide, and both work wonderfully. Not sure on the long term durability yet since I've only been using them for about a year and don't engrave a ton, but once you get the aluminum disc the adhesive sheets...
It depends on the purpose.
I come at it from the knifemaking perspective, so YMMV. I like ivory paper micarta if it's 1) going to be used 2) going to be sculpted or carved 3) not required to look exactly like ivory. The color is right, but it's very even and creamy, which is an advantage if...
The ivory paper micarta is my preferred ivory substitute for now if I'm making a using knife, and if I'm not using mammoth. I've done some small test cuts with a graver, and I think it would engrave nicely. For higher end stuff (safe queens) mammoth or walrus still rule. I have some nice...
True.
I would guess all of that work I posted was pre-2018.
Technically, elephant is only illegal in a few certain states and if it crosses state lines (i.e., is under federal regulation), but it's best avoided generally, and most folks (even high end knife makers) usually substitute some...
Scrimshaw is typical, but not exclusively so. I'm not sure exactly how it's done, but I assume just the normal way like you do on mother of pearl (i.e., extremely carefully). I'm very interested in others' responses.
Here are a few examples I recall:
Not sure who cut this, but it's on a Bruce...
I'm relatively new at this, but coming along quite well. Call me an advanced beginner, or maybe simply intermediate. I'd kinda like to engrave a watch, but I'm at the stage where it would behoove me to not make my first attempt on an expensive one. There's a 99.75% chance I'd keep and wear this...