Search results

  1. A

    Pickling solution

    JJ, Muratic acid in the shop is the best way to ensure rust on everything. It is so bad that I won’t even keep a bottle of it in my shop. Any escaping fumes rust up everything.
  2. A

    Pickling solution

    What exactly are you trying to do?
  3. A

    Ken Hunt, Winston Churchill, and Lynton McKenzie 1983

    I sort of met Lynton in the 70’s. He was at a gun show, I think in New Orleans, engraving a knife. I watched in amazement for at least an hour and would have liked to have talked, but his full attention was on his engraving. I was just a teenager then, but it was the moment that got me...
  4. A

    Selling your work

    I like studying the engraving of others as inspiration, and Knife Purveyor is a company that usually has a nice inventory. They have a “Sell your Knives” tab, so that could be an option to explore. The site can be found at: https://www.knifepurveyor.com/category/engraved/
  5. A

    Straight line engine question - chatter?

    i I’d research milling machine chatter. On a mill, chatter can be caused by looseness in the machine, speed of the cutter, feed rate, dull tooling, and probably some other aspects that I’m not thinking about. Maybe start by tightening down everything, increasing the tool rpm, and slowing the...
  6. A

    Ramblings of a Rookie-Transferring Pen or Pencil Drawings

    Rain kept me indoors all day, so one of my projects was to see if I could transfer pencil drawings and ink pen drawings. After several failures I did find a method that works that is very simple using hair spray. First, wipe down the metal to be engraved with a solvent to get it absolutely...
  7. A

    Graver Lube

    To add a crazy sounding option, bacon grease is an old machinist standby for tapping holes and similar operations. In my experience, it works well for machining operations of steel that require lubrication. I’ve never tried lubrication for engraving, so I can’t vouch for how it might compare...
  8. A

    Big air

    I “piped” my shop a couple years ago, not specifically for engraving, but just so I wouldn’t have to break out long lengths of hose everyone I wanted to use air tools away from the compressor. I used PEX tubing, which was a breeze to run and had all the pressure capacity I would ever need...
  9. A

    A good enough microscope

    I picked up a World Precision Instruments microscope and stand a few years ago from a government auction for under $35. Since I only engrave as a hobby, and only for one or two hours at a time, it has been good enough for me. If I were more committed to engraving, I’d probably need to upgrade...
  10. A

    Graver compatability between Lindsay and GRS handpieces and sharpening systems

    l posted my “work around” for sharpening square gravers in an Apex type system a while back. That thread can be found at: https://engraverscafe.com/threads/ramblings-of-a-rookie-making-a-square-hole-collet.27681/
  11. A

    Best sharpening system // fixture for brand new (broke) beginner?

    You might also look at this: https://engraverscafe.com/threads/lynton-mckenzie-engraving-class-handouts.18162/
  12. A

    Best sharpening system // fixture for brand new (broke) beginner?

    This might help:
  13. A

    Best sharpening system // fixture for brand new (broke) beginner?

    Being a novice, I usually prefer to see the experts’ answers rather than offering my opinion. However, the sharpening system you choose needs to align with the engraving tools you have. If you go with a quick change collet system, then the GRS Apex would match up well. If you will be using...
  14. A

    N

    According to this post, the stamped letters in front of the trigger are an inspector’s marks: https://winchestercollector.org/forum/winchester-rifles/Model+94+Lower+Tang+Question/
  15. A

    N

    I think Winchester sometimes marked lower tangs in that area. That could be confirmed on the Winchester Collector forum.
  16. A

    Cast iron engraving HELP

    Nice work!
  17. A

    Engraved Colt 1851 Navy

    A similar pattern of engraving on an 1851 Colt was sold at auction by Rock Island. In their description it says, “The letters “I.E.” are stamped above the serial number on the barrel lug and below the number on the frame, trigger guard and back strap. This marking was used by the factory on...
  18. A

    Practice Plate Material

    Stainless steel fender washers have worked for me. They are about 1” in diameter with a small hole in the center.
  19. A

    1882 COLT DA .41 WITH FANCY ENGRAVING, ENGRAVER??

    I’ve noted several instances of Colt shipping revolvers to Winchester in a soft state. They also shipped soft revolvers to wholesalers and others. Here is another example: https://www.coltforum.com/threads/very-unusual-colt-m1877-da-“lightning”-engraved-by-winchester-1880.357715/
  20. A

    Just finished

    Sam, if you don’t mind sharing, what method did you use the areas that look sort of greenish gold in the photographs?

Latest posts

Sponsors

Engraving-Videos.com
Engraving-Videos.com
FEGA
Top