Search results

  1. billyProps

    Engraving brass after practicing on steel

    Thanks, I’m a firm believer in eliminating variables, which is why I only use a 120, for now. I sharpen it on a Graverhone with the Apex system the same way every time with a parallel heel, probably .25mm. More practice with softer metals…
  2. billyProps

    Engraving brass after practicing on steel

    Hello, I’ve been practicing and engraving on steel for a year or so now and have gotten pretty comfortable (unless there’s text lol). I just had to engrave on a brass sheet, and it did not go well. The brass sheet was good quality .125” rolled stock (not sure of the grade. it was left over...
  3. billyProps

    First Henry Rifle project

    Anodizing is a good idea.
  4. billyProps

    First Henry Rifle project

    Hello, I’m starting my first Henry Rifle project and I’m wondering what the best ways to finish whatever metal this is. I would just call it pot metal but I’m sure it’s not technically…it’s white and non ferrous and customer service couldn’t tell me either. It has black enamel which I probably...
  5. billyProps

    Magnum vs 901 hand piece face off

    I have both the magnum and 901 and I love the 901. I rarely use the magnum. I found it very useful for applying a dot background with a beading tool installed, but the 901 does everything I need otherwise. Granted I’m a novice and only spend about an hour a day practicing lettering, shading, and...
  6. billyProps

    Practice plates

    I’ve bee I just ordered some steel from McMaster Carr to practice on. I’ve been engraving brass so far and the one time I tried steel it cut surprisingly easy. the steel I ordered is called “high tolerance low carbon steel”. I’m sure there’s a local supplier.
  7. billyProps

    Optical Drawing Aid Like The Lucy

    Watch the movie TIM’S VERMEER.
  8. billyProps

    Dumb question: backhand vs forehand

    Hey Sam, I’m rewatching your flare cut videos and wondered where your camera is situated. Are they recorded from your perspective or is the camera off to the side. I ask because I’m thinking about the angle I hold the graver. I do what’s comfortable and that usually has me steering it pretty...
  9. billyProps

    Dumb question: backhand vs forehand

    Hey, thanks a lot!
  10. billyProps

    Dumb question: backhand vs forehand

    Okay, I figured it out. On a forehand cut the belly of the graver is on the inside of the arc, and on a backhand cut the belly is on the outside of the arc. I don’t know how much sense “forehand” makes to me, but “backhand“ is like pulling back on the stick if the graver was a little airplane.
  11. billyProps

    Dumb question: backhand vs forehand

    Watching Sam’s flare cut videos and I don’t understand what distinguishes forehand and backhand cuts. At first I thought it was based on which side of your hand would be exposed when you roll the graver, but he labels the inside turn of the cuts forehand for both left and right curves. Is the...
  12. billyProps

    Work Station Organization

    Do it!
  13. billyProps

    Work Station Organization

    Maybe I’ll try a points down style for v2.0 with a hole for an m4 lug on the bottom to attach a clamp. The magnets don’t really do much anyway. The holder fits snugly enough on its own that if it was bumped hard enough to knock it off the magnets wouldn’t stop it.
  14. billyProps

    Work Station Organization

    Good... point.
  15. billyProps

    Work Station Organization

    I decided to model my workstation in CAD to make a tool holder for 3D printing. It holds two hand pieces and 9 QC holders. There‘s also space underneath to glue in two magnets, but it clips in securely without them. I’ll Upload an STL to Thingiverse if anyone‘s interested, but it’s pretty...
  16. billyProps

    Magnum vs 901 hand piece face off

    After two weeks with the 901, then switching back to the Magnum, it’s like driving a Cadillac. Really hard to decide which one I like best.
  17. billyProps

    901 and Graversmith question

    As someone who has always just shut off the propane and O2 without properly purging the regulators, I can see how this might seem like a bad one. I’ll try cleaning the handpiece. Actually returning the Graversmith and upgrading to the G8, so we’ll see if it persist.
  18. billyProps

    901 and Graversmith question

    Hi, I’m using a 901 handpiece with a Graversmith and it seems like I might need to adjust something. Doing fairly consistent lines (for me) and then I go deep and power through it. After that, on the next line, the handpiece will be very slow to start and then “pop the clutch” and take off with...
  19. billyProps

    Graver sharpening question

    That’s all it takes... just start looking at the puppy pictures.
  20. billyProps

    First scroll design

    Good notes, thanks.

Sponsors

Top