NgraveR worth owning?

Rockingkj

Member
Joined
Sep 11, 2023
Messages
66
I have a chance to buy a NgraveR flex shaft machine. No foot pedal and only one cutter. Is the thing worth owning? Not a fan of the hand piece since I’m used to my mushroom handle push gravers. But thinking I would like to try a power graver. At $200 it’s not a pile to try but also don’t want to toss $ away. Advice please.
 

pkroyer

Member
Joined
Aug 21, 2013
Messages
88
Location
Kansas City
Does it come with the Foredom motor and flexshaft? If so it might be worth $200. You should be able to find a foot control, possibly on eBay. Are you able to see it working before you buy it? Grease may have hardened in the Ngraver handpiece, if you buy it you may want to clean and lube it. If working, the handpiece could possibly be worth 100. Depending on the condition and model, the motor might also be worth 100. Remember Ngraver is no longer in business and any parts would only be available through eBay, etc.

I have a GRS gravemach and an Ngraver set up. I am not an accomplished engraver, I use them for intricate wood carving. I believe it would be possible to do fine engraving with the Ngraver, but I also believe some of the people on this forum would be able to do great work with a nail and a rock (not me)
 

Rockingkj

Member
Joined
Sep 11, 2023
Messages
66
Thanks for the thoughts it does have the motor and shaft. Given that the Co is outa business got a notion the outfit might be more of a headache than a useful tool.
 

Mike576

Elite Cafe Member
Joined
Nov 20, 2020
Messages
265
Location
Ledyard Connecticut
After owning one of these about 10 years ago at this point; it’s definitely not worth owning. I was not able to learn engraving with this tool to any successful degree. about 4 years ago I went with a lindsay hand piece and took off on much better footing to learning engraving. I think the Ngraver hand piece held me back. It’s like a club compared to most other powered hand pieces being a surgical scalpel. it would be bettet to go with hammer chisel till you save enough for a grs or Lindsay hand piece If you can afford it. Just my 2 cents! Best of luck!
 

Rockingkj

Member
Joined
Sep 11, 2023
Messages
66
After owning one of these about 10 years ago at this point; it’s definitely not worth owning. I was not able to learn engraving with this tool to any successful degree. about 4 years ago I went with a lindsay hand piece and took off on much better footing to learning engraving. I think the Ngraver hand piece held me back. It’s like a club compared to most other powered hand pieces being a surgical scalpel. it would be bettet to go with hammer chisel till you save enough for a grs or Lindsay hand piece If you can afford it. Just my 2 cents! Best of luck!
Thanks. That was my impression when I handed it. Powerless push and hammer and chisel for the future
 

Latest posts

Sponsors

Top