Latest activity
-
Rrweigel replied to the thread Depth of Field for Meiji EMZ-5 microscope.I‘ve got no specific information about your Meiji microscope, but found an interesting snippet in an article about Nikon microscopes...
-
-
Ffresh cut metals replied to the thread Question: Leica microscope s9d.Oh wow. Thank you for this noted
-
FDon‘t forget the parafocality adjustement: It literally saves you headaches, and touching the focus knob after changing the zoom...
-
Rrweigel replied to the thread Question: Leica microscope s9d.Don‘t forget the parafocality adjustement: It literally saves you headaches, and touching the focus knob after changing the zoom...
-
Ffresh cut metals replied to the thread Question: Leica microscope s9d.Thank you all who replied! It finally worked for me. I realized that the “line or dash” in the eye piece is not on top of the...
-
-
F"Thank you for your reply. I’ve double checked this, it is installed properly. Working distance is also at 6.23” with the adaptor." Did...
-
SSinterklaas replied to the thread Depth of Field for Meiji EMZ-5 microscope.Hi Allen, here on this website it says the working distance is 93mm or 3.7" is that what you where looking for? And if you scroll down...
-
FHere's a step-by-step I wrote about setting up a microscope, and it usually gets folks up and running readily. Really important info...
-
i f you reduce the size of the face, it should not be a problem. by properly shaping the graver, the face is reduced well below max. one... -
OOneduck replied to the thread Do you see the face of the graver?.Thanks guys. I’m just trying to set up a good biomechanic as I’m learning. I’m guessing it doesn’t really matter, as long as the cuts...
-
Oi f you reduce the size of the face, it should not be a problem. by properly shaping the graver, the face is reduced well below max. one...
-
Personally, I engrave my name as maker on the underside of the lock bar before hardening. The engraving is clearly visible when the... -
i f you reduce the size of the face, it should not be a problem. by properly shaping the graver, the face is reduced well below max. one...
-
Mmonk replied to the thread Knife Engraving Question.as far back on the blade works for me. ymmv
-
Mmonk replied to the thread Do you see the face of the graver?.i f you reduce the size of the face, it should not be a problem. by properly shaping the graver, the face is reduced well below max. one...
Sponsors
