T.G.III's latest activity
-
TT.G.III replied to the thread Revolver cylinder holder help.Handy people rule......
-
THome made cylinder holder works great
-
TI don't know how thick the plate is but I have found that mounting plates to a block of wood or other solid backup material stops any...
-
TT.G.III reacted to JJ Roberts's post in the thread Announcement: Iconic Scrolls practice plate with
Like.
I hot glue small gun parts to blocks of wood for engraving. J.J. -
TFor intermediate to advanced engravers - laser engraved Iconic Scroll Styles Practice Plate. This intermediate to advanced practice...
-
TT.G.III replied to the thread Revolver cylinder holder help.Also sheet lead will work, just like the leather pads though you'll want to cinch things up a bit after your initial cut
-
TT.G.III replied to the thread Critique Request An attempt at redemption.Ha, light bulb switch, took me years before I started tracing over the transfer, like you mentioned, just got tired of the ink chipping...
-
TT.G.III reacted to alwayslearning2012's post in the thread Critique Request An attempt at redemption with Like.
Thanks so much for that. I never thought of that. Ya know, I really need to get that light bulb switch fixed.
-
TT.G.III replied to the thread Critique Request An attempt at redemption.On the acetone transfer, it takes a bit of extra time but using a scribe and tracing over the design allows for the removal of the ink...
-
TT.G.III reacted to alwayslearning2012's post in the thread Critique Request An attempt at redemption with Like.
This plate was an extra practice plate from October. It was an acetone transfer. The bottom I had to basically guess what it was telling...
-
TT.G.III reacted to EngraverHand's post in the thread Marius Mellebye - EngraverHand Designs and Artwork with Like.
And a little more inlay with a touch of silver while at it.. :) Mirror polished graver and mirror finish surface..
-
TT.G.III reacted to EngraverHand's post in the thread Marius Mellebye - EngraverHand Designs and Artwork with Like.
Got the chance to try a twisted wire inlay on a mirror finish surface.. the wire is 0,53 mm, twisted by two 0,3 mm wires. :-)
-
TFor stainless...your control needs to be as perfect as you can get it. Your gravers will not be able to stand even the slightest wobble...
Sponsors
