A better Bulino Handle

kcrutche

Elite Cafe Member
Joined
Dec 27, 2007
Messages
296
Thread starter #1
A better Bulino Handle

Make your own, Very Light Wight, Excellent Bulino Hand Graver.

See my recent Post (New Bulino Tool).

Rod was correct in that that tool I was using was a little on the heavy side, I took his advice and ordered some wood handles from Contenti (Jewelry Supply) and this is what I came up with.

Make your own, Very Light Wight, Excellent Bulino Hand Graver.

Instructions

You will need to Drill through the GRS QC Tool Holder with a Number 29 drill so as to accept the full length Lindsay Graver Blank (3/32" square x 2-1/2").

You will need to Drill out one Wood Handle to accept the GRS QC Tool Holder (1/4 inch).

After the GRS QC Tool Holder is Glued in place (Epoxy Glue) Drill through the Tool Holder with the Number 29 drill into the Wood Handle to a sufficient depth to accept the Lindsay Graver Blank (3/32" square x 2-1/2").

GRS Traditional QC Tool Holder

Part #004-803 $5.20 Ea.

http://www.grstools.com/graver-accessories/

As pictured

Rosewood Graver Handles
Long Mushroom

1-3/8" diameter head, 2-3/8" length.
Item No. 270-364 $1.98 Ea.

http://www.contenti.com/products/engraving-tools/270-362.html

Or

Wood Graver Handle
Pear Shape

2" length with a 1-3/8" diameter head.
Item No. 270-303 $.91 Ea.

http://www.contenti.com/products/engraving-tools/270-303.html

Try it I think you will like it.
Kenneth Crutcher
 

Attachments

Latest posts

Sponsors

Top