A little scrollwork

SamW

:::Pledge Member:::
::::Pledge Member::::
Joined
Jan 31, 2007
Messages
2,426
Location
Castle Valley, UT in the Red Rock country
Thanks for the info Brian. I was wondering how you supported the base metal, especially with punch dot work which seems to me an easy way to dent thin base metal. I especially like that background. First time I have seen it done so nicely and with such small dots. Beautiful!
 

Brian Hochstrat

Elite Cafe Member
Joined
Nov 9, 2006
Messages
708
Location
Midvale, Id
Good to support Brownells, I have purchased it there in the past, or their is amazon they have vendors that sell it in various temps and alloys
 

JJ Roberts

:::Pledge Member:::
::::Pledge Member::::
Joined
Nov 10, 2006
Messages
3,457
Location
Manassas, VA
I've dealing with Brownell's for over 48 years Bob Brownell got James Meek to write The Art of Engraving I got to thank him on the phone while placing an order. J.J.
 

edgrabow15

Elite Cafe Member
Joined
Nov 16, 2018
Messages
192
Location
SHIRLEY, LONG ISLAND . N.Y.
I just ordered mine from a guy named Joey Bag a donuts in Jersey, Is this stuff supposed to glow? Just kidding, I get my 3 1/2 X 7 inch metal plates to practice on from Brownells, I cut them down to smaller sizes with a shear I bought ( Its manual but works great on the steel plates up to 1/8 th of an inch thick,)
 

Sponsors

Top