Case knife WIP

[Travis_UT]

Working on this Case knife with a bulino English Pointer. I have a few flat spots on my scrolls, I didn't scribe my transfer lines and lost sight of the line as I was turning. Lesson learned, don't try to cut corners for the sake of saving a little time.

 

[John B.]

Hi Travis.
Too much glare in your photo. A little hint if I may, courtesy of my friend Tim George.
Try dabbing the knife with a little modeling clay before taking the photo.

 

[Travis_UT]

Hi Travis.
Too much glare in your photo. A little hint if I may, courtesy of my friend Tim George.
Try dabbing the knife with a little modeling clay before taking the photo.

thanks for that pointer

 

[monk]

i agree with john. the foto doesn't do justice to the work you did. fiddle with the light position a bit to reduce glare. or use a diffuser screen betwixt light and subject.