Lindsey palm control unit to run from scuba tanks?

Col. Batguano

Member
Joined
Apr 24, 2014
Messages
6
Is there away to hook up the Lindsey palm control units to run off of scuba tanks?

I have lots of air tanks and a scuba compressor at home, and it seems a useful adaptation of an already available resource. I'm ready to get one of them if there's a way to lick it, and I really don't want to buy another compressor or a specialized CO2 bottle (that I would have to take places to get filled just for an engraver if I don't have to.
 

Chujybear

~ Elite 1000 Member ~
Joined
Nov 3, 2011
Messages
1,080
Location
Haida Gwaii
Ya. No problem. I put the male quick connect on to my filter/regulator, then the low pressure whip with the female side of the quick connect in the low pressure port. And that's it.
You may need to adapt your threads to connect to you're lindsay regulator. I didn't, because I dug through a box of old gear. But I saw most of them seemed to have a much coarser thread.
 

maplesm

Elite Cafe Member
Joined
Mar 8, 2008
Messages
245
Location
Hopewell, VA
check the intermediate pleasure on your SCUBA regulator. It may be too high for this use. It can be adjusted but will affect the use for diving
 

Latest posts

Sponsors

Top