the third type small, bevelled insert kind.
this type must be made of .062" thick stock. both edges should be bevelled to allow insertion into the copy
carrier of your machine.although i have made these by hand, it is a pita. too time consuming. a good source
is ability plastics. they will cut and bevel the strips to fit your copy carrier. these are suitable for smaller
designs only.
these strips are ideal for the creation of font sets. with computer technology and transfer techniques, a
truckload of fonts can be made rather cheaply. cut a few letters as needed and add more later. or just do the entire set at 1 time. your computer font library is just sitting there waiting. the foto shows just 2 of dozens of commonly used generic designs i've done.
questions to jayismonk450@gmail.com or 724-328-4951-- no pm's please.
this type must be made of .062" thick stock. both edges should be bevelled to allow insertion into the copy
carrier of your machine.although i have made these by hand, it is a pita. too time consuming. a good source
is ability plastics. they will cut and bevel the strips to fit your copy carrier. these are suitable for smaller
designs only.
these strips are ideal for the creation of font sets. with computer technology and transfer techniques, a
truckload of fonts can be made rather cheaply. cut a few letters as needed and add more later. or just do the entire set at 1 time. your computer font library is just sitting there waiting. the foto shows just 2 of dozens of commonly used generic designs i've done.
questions to jayismonk450@gmail.com or 724-328-4951-- no pm's please.