Is it possible to make a die like this on a gorton p1-2? Thanks
B bolo New Member Joined Mar 24, 2023 Messages 1 Mar 24, 2023 #1 Is it possible to make a die like this on a gorton p1-2? Thanks
M monk Moderator Staff member ::::Pledge Member:::: Joined Feb 11, 2007 Messages 10,962 Location washington, pa Mar 24, 2023 #2 i would guess with a circular index fixture you might sneak this thru. i'd guess the long diagonals would be a tad deeper/wider in the middle than on the ends. i'd first test on a "dummy" piece of pvc or similar just to check on the spacing.
i would guess with a circular index fixture you might sneak this thru. i'd guess the long diagonals would be a tad deeper/wider in the middle than on the ends. i'd first test on a "dummy" piece of pvc or similar just to check on the spacing.
