Trying to get into bulino engraving

PeterKramell

New Member
Joined
Jun 4, 2023
Messages
2
Location
Colorado
Hey all,

I've been practicing hammer and chisel engraving for a while now and would like to get into bulino engraving since the pneumatic and electric gravers are just too dang expensive. Does anyone have any advice as to what tools i should buy for bulino? Or just a list of tools for a beginner?

-thanks
 

PeterKramell

New Member
Joined
Jun 4, 2023
Messages
2
Location
Colorado
Also any good instructional videos or online coarses on bulino would also be great if anyone knows of any
 

monk

Moderator
Staff member
::::Pledge Member::::
Joined
Feb 11, 2007
Messages
10,971
Location
washington, pa
there's literally scads of info here and on the net. grs sells quite a few dvd's on engraving techniques. get handy with the search bar. it can unearth much info. also check the classified section of the forum. lots of goodies for sale there by the members.
 

allan621

Elite Cafe Member
Joined
Jan 10, 2007
Messages
374
Chris DeCamillis has an excellent online video showing his bullino technique. He starts at the beginning learner stage and along the way explains how different textures are made with straight cuts. I think it’s only available through Tira Mitchell’s site - engraver.com
 

Mike576

Elite Cafe Member
Joined
Nov 20, 2020
Messages
263
Location
Ledyard Connecticut
The DeCamillis video is great also get a few bulino casting plates from Fega to view under magnification. As for tools it’s pretty straight forward. I use the Phil coogan bulino point template sold by Steve Lindsay or a simple point by chucking my round graver blank into the drill to sharpen on a diamond stone same as a stipple dot tool. For hand pieces I have 3 Lindsay push graver handles one heavy solid stainless steel and 2 of his angle gravers. The hand piece really isn’t important for bulino work though. Check out the work done by firmo and Francesca fracassi. They have a few photos on their instagram which show the tools they use.
 

papart1

:::Pledge Member:::
::::Pledge Member::::
Joined
May 23, 2015
Messages
1,415
Location
Michigan
The furmio and friend have a cd..................................don't waste you money on it
 

Dani Girl

:::Pledge Member:::
::::Pledge Member::::
Joined
May 6, 2012
Messages
1,222
Location
NSW, Australia.
I'd like to get as good at bulino as Firmo Fracassi. That's a very tall order I know. I do tend to aim high, but if I don't I won't see how good I can get.

How do I get from where I am to there?

I do have the two DeCamillis dvds where he does bulino of grass and reeds and water and birds and dogs... They're very good and a great resource for a beginner as he goes over everything, sharpening in great detail... how he thinks as he's moving along and all. Very good teaching. Crystal clear viewing. Good material.

What would other resources are there?
 

Mike576

Elite Cafe Member
Joined
Nov 20, 2020
Messages
263
Location
Ledyard Connecticut
I'd like to get as good at bulino as Firmo Fracassi. That's a very tall order I know. I do tend to aim high, but if I don't I won't see how good I can get.

How do I get from where I am to there?

I do have the two DeCamillis dvds where he does bulino of grass and reeds and water and birds and dogs... They're very good and a great resource for a beginner as he goes over everything, sharpening in great detail... how he thinks as he's moving along and all. Very good teaching. Crystal clear viewing. Good material.

What would other resources are there?
Tall order for sure but exactly my goals some day as well. I have learned a lot from the YouTube videos made by Thierry duguet. He has a few which are very close up bulino scenes and he goes into the tools he uses as well. Got me to understand the way dots are used in varying density’s (in their spacing and depth) to give a range of tones. The videos are real speed and very long 2-3 hours which is amazing to learn from if you have time.
 

JJ Roberts

:::Pledge Member:::
::::Pledge Member::::
Joined
Nov 10, 2006
Messages
3,530
Location
Manassas, VA
Thierry Duguet has been a good friend to me he turn me on to nice microscope I watch him engrave at the Chantilly gun show with H&C amazing talented engraver. J.J.
 

mtlctr

Elite Cafe Member
Joined
Jan 6, 2015
Messages
381
Location
NW Ohio
I'd like to get as good at bulino as Firmo Fracassi. That's a very tall order I know. I do tend to aim high, but if I don't I won't see how good I can get.

How do I get from where I am to there?

I do have the two DeCamillis dvds where he does bulino of grass and reeds and water and birds and dogs... They're very good and a great resource for a beginner as he goes over everything, sharpening in great detail... how he thinks as he's moving along and all. Very good teaching. Crystal clear viewing. Good material.

What would other resources are there?
I would guess practice as much as you can. easier said than done, life happens.
 

Latest posts

Sponsors

Top