Search results

  1. T

    Nimschke Engraved?

    If you go to the site suggested by Roger Bleile suggested and click the letter N you will find some examples of Nimschke's work. Note that his scrolls are tighter and not drawn out like the examples on these Colts. Two suggestions, do an image search of engraved Colts, and also go to a good...
  2. T

    Nimschke Engraved?

    I'm no expert either but I have the book of Nimschke's pulls and prints. This does not look like Nimschke to me.
  3. T

    engraving a VIN# ?

    It sounds to me like someone is asking to preserve a VIN on an older or collectable car. I would think that would be OK. I am sure it would be easy to check state laws, or just check with a car dealer ship.
  4. T

    Anybody like cutting old top break revolvers?

    I got a used Italian repo for my first project. It was not that expensive and was easy to work on.
  5. T

    Substituting ink for enamel/others

    I have used colored epoxy to fill spaces with color. I got it from Reo Grande. It is not something I do often but it did work quite well. You can sand and polish it just like enamel. Reo Grande has a video on their site that shows how to mix it and how to cure it. It does take some heat. I...
  6. T

    Question: Teachers

    Doylestown PA is the location of Engraver.com. Check it out.
  7. T

    Question: Teachers

    Check out Schools (engraver.com) I think they have occasional weekend classes and they are located in eastern PA. Also I am sure you will get to checkout all their new and latest equipment.
  8. T

    Adjustable height chair

    I use a drafting chair so I can change the height.
  9. T

    Resurface ceramic lap?

    Maybe use Krud Kutter, that is what the maker of my diamond sharpening stones suggest putting on the them when sharpening. I have used Krud Cutter when using my diamond plates on my that I use with my GRS hone.
  10. T

    Background

    Keep the background level. You don't need to dig up the background, just nice even stipple and complete coverage. No shiny spots.
  11. T

    Laser Printer Transfer Help

    I have found no difference in paper, although I haven't tried many. I get my paper from Staples but have used others as well. I usually go for the cheap.
  12. T

    Laser Printer drawing transfers

    Sometimes the metal surface needs to have a little bite to pick up the transfer. I suggest cleaning the brass as mentioned and then polish with 320 3M sheets. I think they are the yellow ones they use in the GRS classes. Then clean the surface again. Make the transfer and use a heat gun to...
  13. T

    another layout option

    I wonder if it is the stuff that is in Tom Whites transfer magic. Looks the same only diluted. Try a small sample and dilute it with acetone so you don't need rid the brush with the excess. Let us know how a diluted sample works.
  14. T

    Darkening backgrounds

    It doesn't take much of the inletting black to darken the Renaissance Wax. You need to experiment with small amounts. Take about a tablespoon of wax and mix in the inletting black until you are happy with the look. The wax will dry rather quickly after it is mixed. The drying time, when...
  15. T

    PulseGraver

    Is anyone out there using the new PulseGraver? I haven't seen any mention of it on the Forum. I'm sure someone must have tried it. If it is a good dependable machine it would be good for a beginner as it doesn't need a compressor.
  16. T

    Darkening backgrounds

    I like SamW's method. I thought I was the only one using it. Instead of lamp black I use inletting black. It same thing, only it comes in a neat little container from Brownell's. I mix it in a small container with a screw top. They are about the size of a 50 cent piece. My wife gets them...
  17. T

    Question: Hoping to mine some ideas for a graver carrying case!

    I used a block of wood and drilled holes in it to carry the gravers. I have also used plexiglass and epoxied three layers together and drilled holes in that. I purchased a small toolbox from Lowes to carry those in and others stuff as well. Best to have one with a removeable tray on top. I...
  18. T

    Engraving Transfer Technique

    If you want a transfer with exact detail check out master engraver. Engraving Quick Tips #1 - Transfers - YouTube
  19. T

    Question: treading on sensitive ground...graver formulas

    Does it really need to be so accurate just so the heel and face are symmetrical. and it works. The angle of the face can change according to the hardness. The heel can be long or short depending on the type pf engraving.
  20. T

    Engraving Transfer Technique

    I have found that the acetone, laser printer method works well even for fine detail. The way you make it durable and not rub off is to use a heat gun and heat the item. It will fix the toner on the metal so it will not rub off. Heat is used to fix it on the paper it will make it adhere the...

Latest posts

Sponsors

Engraving-Videos.com
Engraving-Videos.com
Top