Russ Sutton
Member
- Joined
- Nov 9, 2006
- Messages
- 45
I have acquired a Missman Engraving Vise which is a bit unusual in comparison to my two GRS vises. An internet search indicates there was a Missman Engraving School at one time. Also, I found the original patent information on the vise. It's about half as tall as a GRS low profile vise. It also has a ring of what appear to be steel ball bearings about 3/16" in diameter which the top rotates on. The ring is about 4 inches in diameter. Any one have any additional information?
Thanks
Russ Sutton
Thanks
Russ Sutton
Attachments
Last edited: