Pulse Graver

Memorymaker

Elite Cafe Member
Joined
Apr 10, 2016
Messages
285
Location
Baltimore Md
Thread starter #1
Tira has a new engraving machine called the Pulse Graver. It does not use an air compressor. It is fully electronic and the settings are programable, exactly precise and have 8 programmable presets. I have one and I love mine but it’s better when Tira explains it.

There have been some questions about the machine how I like it and how it works. Tira had an great webcast this morning going over the machine, engraving with it and answering any questions. It was almost like being there for me and I learned things I did not know.

Tira is having a webcast like session tonight to show the Pulsegraver, demonstrate it and answer any questions. You have to pre register for it to see and participate in it.

It’s at 7 pm and is free so it is well worth your time. Here is the link:

https://pulsegraver.com/try-it/
Just sign up now and join the webcast at 7pm.

Jus thought you might be interested
 

Memorymaker

Elite Cafe Member
Joined
Apr 10, 2016
Messages
285
Location
Baltimore Md
Thread starter #3
Not much ......... it generates heat but it is built heat resistance materials and has vents so it is comfortable even engraving for hours straight. The machine is well thought out.
 

highveldt

Elite Cafe Member
Joined
Mar 30, 2011
Messages
220
Location
South Carolina
#5
For a couple of years now, I have thought that a small hand piece graver could be built using the latest technology of rare earth magnets.

Does this "pulse graver" use rare earth magnets?
 

dogcatcher

Elite Cafe Member
Joined
Oct 6, 2013
Messages
468
Location
Abilene TX Ruidoso NM
#6
This is my theory on how the Pulse Graver works. The Pulse Graver is controlled by an electronic pulse board. The graver handle uses the power of an electric magnet being activated and deactivated by the pulse board creating a hammer effect by a piston.
 
Joined
Dec 29, 2013
Messages
34
#7
what is the maximum hits per minute on the Pulsegraver? Also, anyone who has used the Enset and the Pulsegraver, can single hits on the Pulsegraver be set to high power hits that are as strong as in the Enset? On the Enset one can increase compressor pressure and adjust handpiece dial also such that each hit is very strong. I prefer those hard single hits when stone setting bezels compared to multiple lower power and shorts hits.
 

Tira

~ Elite 1000 Member ~
Joined
Nov 9, 2006
Messages
1,533
Location
Doylestown, PA
#11
Hello! 3600 - (not 36000) strokes per minute on the PulseGraver is the top speed at the moment. And yes, you can adjust the PulseGraver for high power single hits AND save that setting as a preferred setting so you can get back to it every time with the touch of a button.
 

Latest posts

Sponsors

Top