Jim Kelso
Elite Cafe Member
- Joined
- Dec 17, 2007
- Messages
- 198
Hi guys. Sorry I haven't been active for a while.
I have wanted to use a heron theme for some time. Inspired by one of my favorite herons in metal by the great Shoami Katsuyoshi, I “borrowed†his design and applied it to a fan shaped pin in shibuichi using shishiai-bori(below-surface relief), where all the relief is developed below surface.
The Katsuyoshi piece (round form photo) is takazogan (raised inlay) on a kogo(incense container) and is a fair bit larger. This sort of borrowing of successful designs, either from other metalworks or paintings, is not frowned upon in Japan. I think that as long as full credit is given where due, it is a tip of the hat to the original artist. I would, of course, never presume to pull it off as successfully as Shoami Katsuyoshi.
Kogo photo courtesy of Kagedo Gallery, Seattle.
I used shibuichi made for me by Phillip Baldwin.
http://www.shiningwave.com/
It is an alloy of 70%copper/ 30% silver. The patina is the traditional Japanese niage.
Here is a link to a work-in-progress thread at Don Fogg's Bladesmiths' Forum:
http://forums.dfoggknives.com/index.php?showtopic=21553&st=0
The pin measures 72 mm wide and has an 18k gold bezel.
I have wanted to use a heron theme for some time. Inspired by one of my favorite herons in metal by the great Shoami Katsuyoshi, I “borrowed†his design and applied it to a fan shaped pin in shibuichi using shishiai-bori(below-surface relief), where all the relief is developed below surface.
The Katsuyoshi piece (round form photo) is takazogan (raised inlay) on a kogo(incense container) and is a fair bit larger. This sort of borrowing of successful designs, either from other metalworks or paintings, is not frowned upon in Japan. I think that as long as full credit is given where due, it is a tip of the hat to the original artist. I would, of course, never presume to pull it off as successfully as Shoami Katsuyoshi.
Kogo photo courtesy of Kagedo Gallery, Seattle.
I used shibuichi made for me by Phillip Baldwin.
http://www.shiningwave.com/
It is an alloy of 70%copper/ 30% silver. The patina is the traditional Japanese niage.
Here is a link to a work-in-progress thread at Don Fogg's Bladesmiths' Forum:
http://forums.dfoggknives.com/index.php?showtopic=21553&st=0
The pin measures 72 mm wide and has an 18k gold bezel.