working while staying at home

rmgreen

Elite Cafe Member
Joined
Sep 3, 2009
Messages
338
Location
Washington
Both you and the Other Sam are so supportive, kind and free with your tons of information. Some of your comments have been related to a particular work but it is helpful to all of us who are making effort to increase our skills and knowledge. This is generally true of all on this Forum. SamA many thank for the opportunity to learn in this way.
 

Leland Davis

Elite Cafe Member
Joined
Nov 22, 2014
Messages
548
Location
Wells KS
Thanks Big-un I think I am done with this side movin on. What are you working on during the lock down?
 

SamW

:::Pledge Member:::
::::Pledge Member::::
Joined
Jan 31, 2007
Messages
2,446
Location
Castle Valley, UT in the Red Rock country
Leland, I use the small polishing pins (2mm) as sold by Rio Grande, hand held like a pencil. I use the very fine green one. The case hardening locks in the fine detail and light polishing will remove the color easily without disturbing the metal. I selectively remove the color, leaving it where it does not conflict with the engraving.

Some use chemicals but I have not tried that. The polishing works for me allowing me to take off that which I wish without disturbing the rest.
 

Big-Un

~ Elite 1000 Member ~
Joined
Nov 10, 2006
Messages
1,370
Location
Eden, NC
Thanks Big-un I think I am done with this side movin on. What are you working on during the lock down?
I've been working on a Spyderco Police knife and several small .22 and .25 semi-autos plus a couple graveside stainless flower stakes and my wife's gold bracelet. Too many projects to catch up on as I've been incapacitated due to some health issues (knee replacements, UTI, sepsis and e-coli to name a few) which has placed most of my work on hold as my studio is upstairs and the climb has been tough to get up there. But, it's coming back slowly. Been doing a lot of drawing and studying.
 

Adder

Elite Cafe Member
Joined
Aug 19, 2013
Messages
325
Location
Mo i Rana, Norway
Not so much engraving here. Doing some practise. Want to learn inlaying. Straight lines with silverwire first. 0,5 mm wire. Unfortunately I see that I have to practice more....and of course Big-un, Get well soon !!

Jørn-Ove 20200511_165740.jpg
 

JJ Roberts

:::Pledge Member:::
::::Pledge Member::::
Joined
Nov 10, 2006
Messages
3,520
Location
Manassas, VA
Busy doing restoration on a single action army Colt. and an A5 Browning. Winchester model 12 restoration. Lefever upgrade to grade B. And doing a little archery in the backyard.
 

Attachments

  • 97998128_2984150091672341_8873882331706818560_n.jpg
    97998128_2984150091672341_8873882331706818560_n.jpg
    294.4 KB · Views: 54
  • 97344131_2641892946129758_1974602577156767744_n.jpg
    97344131_2641892946129758_1974602577156767744_n.jpg
    73.9 KB · Views: 54
  • 97696639_909806856131885_5386868847317876736_n.jpg
    97696639_909806856131885_5386868847317876736_n.jpg
    287 KB · Views: 55
  • 98999669_376963226553400_852580072299692032_n.jpg
    98999669_376963226553400_852580072299692032_n.jpg
    136.5 KB · Views: 55
  • 97295717_305113080500782_7605065206246408192_n.jpg
    97295717_305113080500782_7605065206246408192_n.jpg
    231 KB · Views: 54
  • 96528275_173219064023613_7787833549503070208_n.jpg
    96528275_173219064023613_7787833549503070208_n.jpg
    86.5 KB · Views: 54
  • 96545938_238772767449184_4155947206152552448_n.jpg
    96545938_238772767449184_4155947206152552448_n.jpg
    114.7 KB · Views: 52
  • 96786792_581827119115194_7848974569330180096_n.jpg
    96786792_581827119115194_7848974569330180096_n.jpg
    281.3 KB · Views: 52

Big-Un

~ Elite 1000 Member ~
Joined
Nov 10, 2006
Messages
1,370
Location
Eden, NC
Big-un get well soon and remember the dixon#2 pencil is your friend and so is the eraser on the other end
Thanks to all you guys for your concerns. I try not to mention things like this as there are others in far worse shape than I. It's just frustrating to want to create something and not be able to due to the old body wearing out. I have a Dr's appointment tomorrow morning to address the issue of my patella in the last knee replacement; it won't stay in place and hurts like the dickins when I try and get up from sitting. Anyway, I'm a glass half full guy and with the Good Lord's help, this too shall pass. I'll post something when I get a chance.
 

FANCYGUN

~ Elite 1000 Member ~
Joined
Nov 10, 2006
Messages
1,853
Location
West Grove, PA
Well still maintaining social distance as much as possible here. Still engraving the Winchester but a bit burnt out on it and need to change things up so I can look at what I am engraving with a fresh perspective.
So as a change-up I am getting set to engrave a custom stainless steel golf putter. Never did one of these so it should be fun. Also playing around with Procreate to do the sketches and I must admit it is a very interesting program for the money Not being an expert on it I have come up with this rough sketch for the design
Stay Safe

PUTTER bottom JPG.jpg
 

Latest posts

Sponsors

Top