Question: Looking for sharpening fixture

[BigMeats420]

I'm looking for a used EnSharp VersaFixture Graver Sharpening Fixture or any fixture that's accurate. Thanks

 

[monk]

I'm looking for a used EnSharp VersaFixture Graver Sharpening Fixture or any fixture that's accurate. Thanks

pleasse post this in the buy sell section. .e bay has used goodies too. don't buy a crocker graver sharpener. they're a pita to get consistent results each time.

 

[BigMeats420]

Okay, my apologies. 1 more ?, well 2, what's the difference's between the GRS system & the Steve Lindsay system(both of their top of the line system) and which 1 would u fellas recomend. I Highly appreciate it, Thank you fellas

 

[Stratos21]

Where are you from

 

[BigMeats420]

Where are you from

From Southern California

 

[BigMeats420]

 

[Stratos21]

unfortunately I'm from Greece and you will have a lot of taxes

 

[JJ Roberts]

BigMeats,Go to Steve Lindsay's site and look at Carl Bleile's way to sharpen gravers with a drill press,sharpening templates & diamond disk's,I'm set up to show my students save $$$$. J.J.

 

[BigMeats420]

unfortunately I'm from Greece and you will have a lot of taxes

Damn, thanks thou

 

[BigMeats420]

BigMeats,Go to Steve Lindsay's site and look at Carl Bleile's way to sharpen gravers with a drill press,sharpening templates & diamond disk's,I'm set up to show my students save $$$$. J.J.

That's what I've been thinking too, I just wanted some1 with knowledge in engraving opinion. I bought their graver holder , now I'm getting my sharpening system almost done getting everything needed to sharpen, all im debating on is either to save and wait longer and buy the dual angle GRS fixture (the best, might as well), ensharp versafixture or buy 1 template from lindsay?? But I think in the long run I'll b better of buy the ensharp versafixture cuz I already have the holder that holds 3/32 or the GRS dual fixture.

 

[monk]

Okay, my apologies. 1 more ?, well 2, what's the difference's between the GRS system & the Steve Lindsay system(both of their top of the line system) and which 1 would u fellas recoe a shoebox fullmend. I Highly appreciate it, Thank you fellas

i have both. lindsay requires a different template system for each geometry wanted. very easy to use, and accurate. the grs system is also very accurate, but it will do any geometry you want. it has 2, adjustable protractors. one in the vertical plane, the other is for the horizontal plane. with the grs, you don't have a shoebox full of templates to deal with.
i think i have 10 templates by lindsay. takes up a lot of shelf space.

 

[JohnC]

If you are interested I have the Lindsay system and a number of templates.
universal templates (clear)
Mrthe 50 degree v & rounded corner flat (black)
Les Schowe gold inlay & undercut (blue)
Knife & flat combo (smoke)
I think $185.00 plus shipping is what I paid I could send to you for 100.00 plus 20.00 shipping total $120.00 let me know if this interest you.

P.S. I am using round hhs blanks and sharpening them on the GRS dual angle fixture and a HF drill press

 

[BigMeats420]

If you are interested I have the Lindsay system and a number of templates.
universal templates (clear)
Mrthe 50 degree v & rounded corner flat (black)
Les Schowe gold inlay & undercut (blue)
Knife & flat combo (smoke)
I think $185.00 plus shipping is what I paid I could send to you for 100.00 plus 20.00 shipping total $120.00 let me know if this interest you.

P.S. I am using round hhs blanks and sharpening them on the GRS dual angle fixture and a HF drill press

Yes I'm interested

 

[BigMeats420]

If you are interested I have the Lindsay system and a number of templates.
universal templates (clear)
Mrthe 50 degree v & rounded corner flat (black)
Les Schowe gold inlay & undercut (blue)
Knife & flat combo (smoke)
I think $185.00 plus shipping is what I paid I could send to you for 100.00 plus 20.00 shipping total $120.00 let me know if this interest you.

P.S. I am using round hhs blanks and sharpening them on the GRS dual angle fixture and a HF drill press

Jon thank you sir. I so appreciate this

 

[BigMeats420]

If you are interested I have the Lindsay system and a number of templates.
universal templates (clear)
Mrthe 50 degree v & rounded corner flat (black)
Les Schowe gold inlay & undercut (blue)
Knife & flat combo (smoke)
I think $185.00 plus shipping is what I paid I could send to you for 100.00 plus 20.00 shipping total $120.00 let me know if this interest you.

P.S. I am using round hhs blanks and sharpening them on the GRS dual angle fixture and a HF drill press

I meant JohnC thank you

 

[BigMeats420]

If you are interested I have the Lindsay system and a number of templates.
universal templates (clear)
Mrthe 50 degree v & rounded corner flat (black)
Les Schowe gold inlay & undercut (blue)
Knife & flat combo (smoke)
I think $185.00 plus shipping is what I paid I could send to you for 100.00 plus 20.00 shipping total $120.00 let me know if this interest you.

P.S. I am using round hhs blanks and sharpening them on the GRS dual angle fixture and a HF drill press

JohnC just let me know how we doing this, I'm ready waiting on u

 

[BigMeats420]

 

[JohnC]

JohnC just let me know how we doing this, I'm ready waiting on u

It sounds like you are interested. You can give me your mailing address and mail me a check for $120.00. I have a paypal account, You could send the money that way also. You could call me if you have any questions 607-734-8044

 

[BigMeats420]

If you are interested I have the Lindsay system and a number of templates.
universal templates (clear)
Mrthe 50 degree v & rounded corner flat (black)
Les Schowe gold inlay & undercut (blue)
Knife & flat combo (smoke)
I think $185.00 plus shipping is what I paid I could send to you for 100.00 plus 20.00 shipping total $120.00 let me know if this interest you.

P.S. I am using round hhs blanks and sharpening them on the GRS dual angle fixture and a HF drill press

It sounds like you are interested. You can give me your mailing address and mail me a check for $120.00. I have a paypal account, You could send the money that way also. You could call me if you have any questions 607-734-8044

okay, I'll go thru paypal

 

[BigMeats420]

okay, I'll go thru paypal

It sounds like you are interested. You can give me your mailing address and mail me a check for $120.00. I have a paypal account, You could send the money that way also. You could call me if you have any questions 607-734-8044

Send me ur PayPal info