practice cube

thughes

:::Pledge Member:::
::::Pledge Member::::
Joined
Sep 28, 2010
Messages
845
Location
Nashville TN
Made this little cube of stainless (1.25") kind of to be a sampler to show people. The one with all the background removed was a real shocker when I looked at the photo taken outside on a cloudy day. My background didn't look near that uneven , even under the scope. It seems that when I use my tiny flat inside the scrolls and things I can keed it pretty flat, but when I get out in the wide open with the bigger flat, I guess the flat not held perfectly flat was a lot worse than I realized. More practice I rekon. Any way, any critique is welcome.

Thanks
Todd
 

Attachments

  • Sample cube 003.jpg
    Sample cube 003.jpg
    123 KB · Views: 270
  • Sample cube 001.jpg
    Sample cube 001.jpg
    129.9 KB · Views: 266
  • Sample cube 002.jpg
    Sample cube 002.jpg
    122 KB · Views: 268

Andrew Biggs

Moderator
Joined
Nov 10, 2006
Messages
5,035
Location
Christchurch, New Zealand
Hi Todd

Good idea and looks good. It would be worth fixing that background up.

If you have large areas of background, before stippling, you can even up the surface with a punch made out of old burs or beading tools. After the flats, just hammer the surface even. Then stipple.

Cheers
Andrew
 

monk

Moderator
Staff member
::::Pledge Member::::
Joined
Feb 11, 2007
Messages
10,954
Location
washington, pa
i'm thinkin maybe the roughness sort of adds to the overall appeal of the piece.
 

thughes

:::Pledge Member:::
::::Pledge Member::::
Joined
Sep 28, 2010
Messages
845
Location
Nashville TN
Thank ya'll for the comments. That's a good idea Andrew, thanks, I never thought of that.

It's kind of funny, I got this foot long square bar of stainless basically for free cause it was left over from a job. So I was wondering what I could do with it. So I cut it up into cubes and started doing these, well what amounts to doodles really, that I thought I could show to people kind of like a sampler. Now everybody that sees it says "I don't know what it is, but I want one, how much". Who'd a thunk it? Next time I would not take out the background in the middle, but it sure showed me something I need to work on, a lot.
 

dlilazteca

~ Elite 1000 Member ~
Joined
May 10, 2013
Messages
2,659
Location
Laredo, Texas
Could be a very nice paper weight, I would not mind one, to also matching stainless steel envelope opener.

Thanks for sharing

Carlos De La O III
 

Eric Olson

Elite Cafe Member
Joined
Nov 16, 2010
Messages
221
Location
Louisville, CO
Your background is fine in the smaller areas -
You could scale the design up a bit, add some more leaves or even a geometric border so there is less background next time.
In the square piece you have a lot of room to add leaves coming off the back of the scrolls.
This will fill the space better and anchor your design to the edges.
Also remember the "thumbs" and to shade the large ends of your scrolls. You might even add thumbs to some of your smaller elements.

I think it looks pretty darn good over all though.
 

LVVP

~ Elite 1000 Member ~
Joined
Dec 13, 2006
Messages
1,382
Location
Toronto
Todd,

Looks very nice for me, and thanks to Andrew for the advice
 

Marrinan

~ Elite 1000 Member ~
Joined
Nov 11, 2006
Messages
2,917
Location
outside Albany in SW GA
Some time ago Ray Cover made similar pieces with each of his most common styles. He carefully measured the time required in each stage: design, layout, scribing, border, initial cuts, background removal, leveling, stippling, inlay/overlay, shading (in various degrees of fineness etc. Each of these beautiful pieces serve several purposes. They are exactly 1 sq inch. They provide samples of his "standard" work. They demonstrate the styles he commonly does. Most importantly he knows exactly how much time each style take per sq inch. This provides a fairly accurate method of estimating job costs. Still have to factor in material hardness, odd contours and obstacles to work around. But for flat or nearly flat work like a knife bolster he simple calculates a cost per sq inch factors in shop expense, hourly rate, benefits, and PROFIT. and he can give a bid he wont loose the farm on. His specialty bulino work and very unusual design require years of experience to estimate. Search for his thread in how much to charge treads. He explains it much better. Fred
 

Latest posts

Sponsors

FEGA
Top