Practice plate “Sam’s design” first attempt beveling

ByrnBucks

:::Pledge Member:::
::::Pledge Member::::
Joined
Dec 25, 2020
Messages
184
Location
Chattanooga, TN
Good evening gentlemen, just wanted to post this plate as I was quite surprised at the results. I have only recently switched from copper to steel, as such have always inked my copper plates for viewing. Combined with a “one step at a time approach“ beveling cuts has been a variable I didn’t consider myself ready for. Since sinking my teeth into some steel and seeing the pleasing shine of the cuts it was time to give it a whirl.

Pardon the lack of personal design the scroll is from Sam’s ornate design book, and the border is from his beginner dvd. So let me once again say thanks to Sam for making educational material available for those who find themselves fumbling around trying to find which way is up.

Please feel free to critique this as I will be just delighted if I can reproduce this… fingers crossed haha. Thanks for looking I hope everyone is doing well. BB
 

Attachments

  • 48DDFD3E-420E-4590-A3FF-1A8986FB9606.jpeg
    48DDFD3E-420E-4590-A3FF-1A8986FB9606.jpeg
    161.7 KB · Views: 153
  • 4FC65ADF-F40E-4D28-A6B5-AB757C9ECA54.jpeg
    4FC65ADF-F40E-4D28-A6B5-AB757C9ECA54.jpeg
    168.4 KB · Views: 150
  • FB56CD47-A358-43FF-B1F9-BAEA6B382D2D.jpeg
    FB56CD47-A358-43FF-B1F9-BAEA6B382D2D.jpeg
    152.5 KB · Views: 147

papart1

:::Pledge Member:::
::::Pledge Member::::
Joined
May 23, 2015
Messages
1,308
Location
Michigan
I like the border.................actually all of it, but the border sticks out. Nicely done mister!!!!!!!!!!!!!!
 
Top