XD slide idea?

Beladran

Elite Cafe Member
Joined
Jul 2, 2013
Messages
345
Location
mississippi
I was given this slide by a friend it's fubar but perfect for engraving practice. I have been wondering what to do with it since Springfield was so kind to hog up all the prime real estate.

I thought about this..

I know it's not perfect but can you see what I'm aiming for? Thoughts, comments, good bad ugly..

O an I thought about tinting my damar varnish white some white paint to add a little contrast for my transfers. Anyone tried that?
 

Tim Wells

~ Elite 1000 Member ~
Joined
Nov 9, 2006
Messages
1,331
Location
Dallas, Georgia
Design scrolls all over it and weave some tendrils through the lettering and see what you come up with. Don't be in a hurry to cut anything, just draw, draw, draw until you end up with something you really like, from any angle.
 

Andrew Biggs

Moderator
Joined
Nov 10, 2006
Messages
5,035
Location
Christchurch, New Zealand
What is it you want a comments and thoughts on? The scrolls or the slide??

The slide looks great and I would suggest that seeing it's just for practice, don't try to file out the manufacturers marks.

The scrolls.......well, take heed of what Tim (above) has said :)


Cheers
Andrew
 

atexascowboy2011

Elite Cafe Member
Joined
Feb 13, 2012
Messages
997
I use white machinist layout fluid, then damar. Works great for old tired eyes. I think Tom White has a white mix. Just Google "Tom White's Transfer Solution".
Jeff
 

Roger Bleile

~ Elite 1000 Member ~
Joined
Oct 4, 2007
Messages
2,992
Location
Northern Kentucky
I test cut a Springfield XD on the inside and it was OK then I started on the outside of the slide and it was diamond hard. I could not get an eighth of an inch before the tip of a carbalt graver broke.

As to your design: All good scrollwork begins with perfect spirals. Start over.
 

KCSteve

~ Elite 1000 Member ~
Joined
Jun 19, 2007
Messages
2,882
Location
Kansas City, MO
I think the others have it right - use it for a design piece but don't bother trying to actually cut on it. Working your design on a real part will help you with all of the things that only come up on real parts with real things you have to work around (like manufacturer's marks).

Cutting through a vacuum deposited ceramic (which I think is what that slide is coated in) would make for a very non-fun day, as Roger found out.
 

Beladran

Elite Cafe Member
Joined
Jul 2, 2013
Messages
345
Location
mississippi
thanks for the heads up on the coating. I was gifted four 1911 slides today so looks like im going to have alot of "practice plates" I know they will be more fun to cut than this XD slide
 

zzcutter

Elite Cafe Member
Joined
Sep 19, 2011
Messages
327
Location
Berks Co. Pa.
I would be interested to see how well you can cut it. I am presently doing an Kimber 1911 stainless steel slide and the hardness is not consistence. One area is hard then all of a sudden soft. I have to go very slowly as so my chisel doesn't get ahead of me.
 

LVVP

~ Elite 1000 Member ~
Joined
Dec 13, 2006
Messages
1,382
Location
Toronto
I would be interested to see how well you can cut it, too
thanks
 

Ed Westerly

~ Elite 1000 Member ~
Joined
Mar 16, 2011
Messages
1,224
Location
southern California
If it can be cut, don't let the Springfield writing bother you. It is not for use on a gun, so cut the letters off with a carbide flycutter on a mill, or sand them down till they are gone, and engrave everything! (BTW, as long as the gun is not a NFA item, the only marking you have to keep is the serial number!)
 

Southern Custom

~ Elite 1000 Member ~
Joined
Mar 8, 2013
Messages
1,026
Location
Baton Rouge
I had the same experience as Roger. Now the slide I have is the black finish and it is far too tough to cut. I don't know about the stainless version of it. If it is anything like mine, it'll snap a graver tip like it's glass.
Layne
 

Latest posts

Sponsors

Top